Your recent

Welcome to your history toolbox

We've saved important information from your previous searches to make your life easier.



Last tyres viewed

Last dealers viewed

Last searches

Do I need new tyres?

What are the basics?

There is no way to tell exactly how long a tyre lasts. The lifespan and mileage of a tyre depends on a combination of factors: its design, the driver’s habits, the climate, the road conditions and the care that's put into the tyres.

A few milestones and tips:

1- Keep five years in mind

After five years or more in use, your tyres should be thoroughly inspected at least once per year by a professional.

2- Ten years is a maximum

If the tyres haven't been replaced 10 years after their date of manufacture, as a precaution, Michelin recommends replacing them with new tyres. Even if they appear to be in a usable condition and have not been worn down to the tread wear indicator. This applies to spare tyres as well.

3 – Proper care expands a tyre’s lifespan

If you take good care of your tyres' air pressure, tread wear, alignment and so on, you can increase their longevity.

Check our Scheduled care tips

For original equipment: follow the vehicle manufacturer’s tyre replacement recommendations.

How to check the manufacturing date

Look for the DOT number on your sidewall.

What damages tyres?

Physical factors:

  • Age
  • Wear and damage

Road conditions:

  • Potholes, obstacles,curbs ,sharp objects, speed bumps


  • Extreme temperatures
  • Rain, snow and ice
  • Oil, grease and other chemicals
  • Strong sunlight and ozone

Driving habits:

  • Speeding
  • Quick starts and emergency braking
  • Driving on damaged roads
  • Failure to notice a change in handling, noise or vibration
  • Failure to consult a professional when something changes

Neglecting basic tyre maintenance:

  • Air pressure
  • Not routinely checking for wear or damage
  • Alignment and rotation
  • Not going to a professional to remove or fit tyres in case of damage or after an impact
  • Not balancing tyres after they are fitted or replaced
  • Improper tyre storage
  • Use of sealants that have not been approved

Improper usage:

  • Using summer tyres on snow and ice
  • Mixing tyre types
  • Using tyres on damaged, distorted or modified wheels
  • Using wheel and rim sizes that are not compatible
  • Fitting tyres that do not have a speed capability and load index at least equal to or higher than those originally specified by the vehicle manufacturer
  • Re-inflating a tyre that has been run flat or seriously under inflated
  • Using a spare tyre of a different size at speeds in excess of 50 mph

Do I need to change now?

We recommend to replace your tyre if:

  • The tread is worn beyond the recommended tread depth levels
  • The sidewall is damaged
  • Any hole in the tread is greater than 6 mm in diameter
  • The bead is damaged or deformed (the bead is the edge of the tyre that sits on the wheel)

1- Inspect your tyre regularly and look for:

  • Uneven tread wear
  • Shallow tread
  • Troublemakers (rocks, nails, etc.)
  • Damaged areas
  • Damaged valve caps

2- Pay attention to the “feel" of your tyres as you drive.

  • A rough ride may indicate tyre damage or excessive wear
  • If you notice vibrations or other disturbances while driving, immediately reduce speed, drive with caution until you can safely pull off the road and stop, and inspect your tyres.
  • If a tyre is damaged, deflate it and replace it with your spare. If you do not see any tyre damage and cannot identify the source of the vibration, take the vehicle to a tyre dealer for a thorough inspection.

3- See a professional

  • - If you see something that you’re not sure about during your inspection, have it examined by your tyre dealer.

To identify a specific problem.

How do I inspect my tyres?

1- Check your air pressure

  • It’s quick and can prevent many problems
  • Do it once a month

See Air pressure: what should I know?

2- Check the tread wear with one of the three methods:

  • With a tread depth gauge
  • With the tread wear indicators

See How to check if you have enough tread left.

3- Inspect your tyres for wear and damage problems

  • Check your sidewall for any punctures or bumps and the tread to see if the tyres are wearing evenly.
  • Be sensitive to any changes in handling or steering.

See Worn out or damaged?

When should I inspect my tyres?

  • Once every month
  • Before you go on a long road trip.

Next steps :

  • Any visible perforation, cut or deformation must be checked thoroughly by a tyre professional.
  • Only a tyre professional can tell you if your tyre can be repaired or has to be changed.

Spare tyre: can I use it on a day-to-day basis?

Temporary spares have lighter construction to limit their weight on your vehicle so they don’t have the same speed or mileage capabilities. This could affect your vehicle’s stability. The only exception is if your spare tyre is actually a fifth full-size tyre that exactly matches the tyres on your vehicle.


The legal requirements on tyres: what are they?

All-season / Summer / Winter tyres: what is the difference?

To make sure that you are always safe, your tyres need to be adapted to your current weather conditions.

1- All-season:

Built to handle “everyday” driving conditions. They have great grip on dry and wet road as well as acceptable snow traction in regions with light winter weather. All-Season tyres are a practical solution designed for year round usage, typically with a longer tread life.
However, if you have all-season tyres and the winter weather is especially severe in your region, you should consider changing to winter tyres for the heavy winter months .

Summer tyres:

These tyres are optimised for dry and wet performance levels in a warmer environment. In the US, they are primarily found on high-performance vehicles. However, if you live in a climate where winter temperatures are colder and approach freezing regularly, you should consider changing to winter tyres during the cold months.
The rubber on summer tyres is not designed to handle temperatures below 7 °C – it gets stiffer and loses grip

Do I need winter tyres?

Yes, if you live in an area where the ambient temperature regularly goes below 7° celcius. (44°F) or gets heavy snow or ice. At that temperature, the rubber on standard tyres starts to harden and loses grip.

Winter tyres vs. Summer tyres in winter weather

  • Winter tyres are designed to perform better at lower temperatures and in a wide range of conditions such as wet roads, snow and ice. The difference in braking between winter tyres and summer tyres can be startling: a typical car travelling at just 50km/h on snow will take 48m to come to a full stop with summer tyres – a scary 24m more than if the same car is equipped with winter tyres.

When is it time to change my seasonal tyres?

When the temperature regularly goes below 7˚ celcius (44˚F), replace your standard tyres for winter tyres.
Put your standard tyres back on when the temperature regularly warms back up.


Can I use a high performance tyre if my vehicle doesn’t require one?

  • If you prefer a sportier look or feel to your drive, you may choose to upgrade your tyres to “high-performance” tyres with a higher speed rating.
  • High performance tyres will give you higher speed capability, improved handling control and maximize dry road grip to feel each curve.
  • But to get that extra grip, you may give up some tread life.

Fuel consumption: how does upgrading impact it?

High-performance tyres with higher speed ratings are designed to provide more grip. By definition that means comparatively lower fuel efficiency than for standard tyres since more grip often means more rolling resistance and more effort needed from the engine to move the car forwards. However, thanks to our Michelin Total Performance philosophy, we strive to deliver both great handling and fuel efficiency in our high-performance tyres.

What are run flats and who can use them?

What are "run flat" tyres?

Run flat tyres have specific technology to allow you to drive for a limited distance at a reduced speed after a puncture or a drop of tyre pressure. MICHELIN Zero Pressure (ZP) tyres provide run-flat technology that allows you to drive up to 50 miles at 50 mph with a flat tyre.

Can I mount run flat tyres on any vehicle?

No, only vehicles that originally were equipped with run flat tyres should mount them – these vehicles have some suspension and chassis modifications designed for run flat tyres.

Can I mix run flat tyres with normal tyres?

  • Never mix run flat tyres with tyres that do not have run flat technology (conventional tyres) – unless in an emergency situation on a limited, temporary basis. The conventional tyre should be replaced with a run flat tyre as soon as possible.
  • It is also not recommended to mix different run flat technologies/products together.

My run flat tyre has been punctured. How long can I drive on it?

Run flat tyres only allow you to drive for a limited distance and reduced speed after a puncture or other event has resulted in either a drop in tyre inflation pressure or a complete loss of inflation pressure. If you have MICHELIN Zero Pressure (ZP) tyres, you can drive up to 50 miles at 50 mph with a flat tyre.

My tyre is low: what should I do?

A tyre is low (or soft) when it doesn’t have sufficient air pressure to meet the vehicle manufacturer’s recommended psi (pressure per square inch). Soft tyres lead to flats and tyre blow outs.


Add air to your tyre until it reaches the proper air pressure (in psi, as measured by an air pressure gauge). To find the air pressure recommended for your tyre, consult your vehicle’s owner’s manual or find your recommended psi on the sticker on your door.

See where

Some advice:

Never use tyres that have been driven with very low pressure unless they have been thoroughly examined internally and externally by a tyre professional.


Internal damage is not visible while the tyre is mounted; only a professional can tell whether the tyre can be safely used again.

I need to replace my tyre. Any advice?

General advice

  • Michelin recommends replacing all four tyres at the same time for maximum safety, to maintain even wear and traction on all four tyres.
  • Take time to research. You can re-buy your original equipment or a different set of tyres. They need to fit your vehicle, your climate, driving environment and your driving style. See How to choose a tyre
  • See a professional to mount and align your new tyres.

Replacing only two tyres

  • Your new tyres need to be the same size and tyre type as your current tyres.
  • Your new tyres need to be installed on the rear axle of your vehicle.
  • If you buy any variation from the original equipment tyre size or speed rating, consult your tyre dealer and the the Fitting Guide for recommendations.
  • If you replace less than four tyres, the rotation of the tyres might be affected.